Skip to content

C-Frame, H-Frame and Plinth Benches: Differences and How to Choose

Laboratory benches 5 min read

C-frame, H-frame and plinth laboratory benches differ in what carries the worktop and the instruments on it. On a C-frame a steel structure carries the load and the base cabinets are suspended or mobile; on an H-frame legs bolted on site carry it and the cabinets are mobile; on a plinth bench the base cabinets carry it. Instrument weight, density of services, cleaning and whether the layout may change decide the choice.

When choosing a laboratory bench, the first thing discussed is usually the worktop. Yet it is the frame system that decides daily use, cleaning, access to services and what can be done when the laboratory changes. KRCLAB manufactures laboratory benches on three frame systems: C-frame, H-frame and plinth. Each comes in wall and island models.

At a Glance

C-frameH-framePlinth
Load-bearing partC-type steel structure, 40 × 60 × 2 mm tubeHorizontal and vertical legs, 40 × 40 × 2 mm tubeBase cabinets, 18 mm MDF
AssemblyFully demountableLegs bolted together on site, fully demountableFixed bench
Base cabinetsSuspended from the frame or mobile beneath itLockable and mobileLoad-bearing and fixed, on a 90 mm plinth
FloorSuspended cabinets 180 mm above the floorSwivel feet adapt to the floorAt least 20 mm above the floor on rigid PVC levelling feet
Access to servicesBy removing the back panel and suspended cabinetsThrough the 15–20 cm service void at the backThrough the service void behind the cabinets
FinishesMetal panels behind knee spaces and at the endsDemountable MDF end panels; knee spaces where requiredRemaining spaces closed with steel panels
Island bench150 cm deep, 200–350 cm long150 cm deep, 200–360 cm longShelving, cabinet, single- and double-sink options

C-Frame: the Structure Carries the Load

On C-frame benches the steel structure is the skeleton of the bench, so the weight of the system and the instruments on it is not carried by the base cabinets. The back of the frame, facing the wall, is designed for building services to run through and be installed easily. As the suspended cabinets and back panels carry no load, they can be removed for access to services. Suspended cabinets sit 180 mm above the floor, which keeps the area under the bench easy to clean.

When to consider it: When heavy instruments will stand on the bench, services are dense and need frequent access, and easy cleaning under the bench matters.

H-Frame: Assembled on Site with Mobile Cabinets

On H-frame benches horizontal and vertical legs of 40 × 40 × 2 mm tube are bolted together on site, with swivel feet under the uprights to suit the floor. The base cabinets and drawers are lockable and mobile; on wall benches each carries at least 35 kg. Knee spaces can be placed wherever required, and the ends of the frame are closed with demountable MDF end panels.

When to consider it: When the layout is expected to change, cabinets need to be moved or the space under the bench cleared, or there are many seated work places.

Plinth: a Fixed Bench Carried by Its Cabinets

Plinth benches have no separate frame; the base cabinets form the bench structure. A 90 mm plinth is added beneath the cabinets, and rigid PVC levelling feet keep them at least 20 mm off the floor. The space left behind the cabinets is closed with steel panels to form a service void. The worktop can be compact laminate, industrial ceramic, Corian, stainless steel, polypropylene or granite.

When to consider it: When the layout will stay fixed for a long time and the cabinet arrangement is clear from the start.

5 Questions for Choosing

  1. How heavy are the instruments on the bench? If their weight should not rest on the base cabinets, the C-frame stands out.
  2. How dense are the services? If water, gas, vacuum and electrical lines are dense, look at how they are reached. Service units are built independently of the benches and chosen as Mediacell type or panel type according to density.
  3. How will the space under the bench be cleaned? Suspended cabinets leave the floor clear, mobile cabinets are pulled out, and plinth cabinets stand at least 20 mm off the floor.
  4. Will the layout change? C-frame and H-frame benches are fully demountable, so they can be taken apart, moved, extended and added to. A plinth bench is a fixed solution.
  5. Seated or standing work? A height of 75 cm is for seated work and 90 cm for standing work; knee spaces are planned where people will sit.

Whatever the frame, the worktop is chosen for the chemicals in use; compare the options on our worktops page.

How Does the Frame Affect the Price?

The frame system changes the structure, the base cabinets and access to services, so it affects the price. The total, however, is set by the worktop, cabinets, sinks and service units together; we explain the details in what sets the price of laboratory benches.

An Example from Our Projects

For the Nurol Teknoloji Quality Control Laboratory we designed mobile systems whose base cabinet modules can also serve as transfer carts, an example of how mobile cabinets can be adapted to a workflow. Photos of other installations are on our installation and assembly page.

Frequently Asked Questions

What is a plinth bench?
A plinth bench has no separate steel frame; the base cabinets on a 90 mm plinth carry the worktop. Levelling feet keep the cabinets at least 20 mm off the floor.
Can the base cabinets of a C-frame bench be removed?
Yes. The suspended cabinets and back panels carry no load, so they can be removed for access to services.
How is an H-frame bench assembled?
The horizontal and vertical legs are bolted together on site, with swivel feet under the uprights to suit the floor. The base cabinets are placed as mobile units.
Can the same worktops be used on every frame?
The worktop is chosen for the chemicals in use, whatever the frame: compact laminate, industrial ceramic, Corian, stainless steel and polypropylene are available, and granite is also an option on plinth benches.
Can wall and island benches use different frames?
All three systems come in wall and island models. The choice is made in the layout, together with the instruments on the benches and the arrangement of services.
Not sure which bench system suits you? Send us your plan, instrument list and chemicals; we will choose the right frame and worktops with you and prepare an itemised quotation. Ask for a quotation · Laboratory bench systems

More Articles

All Articles
  • Laboratory setup

    Laboratory Setup Cost: A Budget Planning Guide for 2027

    The cost of setting up a laboratory cannot be worked out from a price per square metre; it is the sum of design, building work, ventilation, electrical, gas and plumbing services, flooring, laboratory furniture, fume hoods, chemical storage, safety equipment and testing. The number of fume hoods, the existing building, the worktops, any cleanroom and the scope of work move the budget most. An accurate budget is drawn up item by item once the requirements and layout are ready.

  • Laboratory benches

    What Sets the Price of Laboratory Benches? Frame, Worktop and Equipment

    The price of laboratory benches depends on the frame system (C-frame, H-frame or plinth), whether they are wall or island benches, their dimensions, the worktop material, base and wall cabinets, sinks and fittings, service units and the scope of installation. A single price per metre can therefore mislead; the right price comes from the layout and the chemicals to be used.

  • Laboratory setup

    How to Set Up a Laboratory: 7 Steps from Design to Handover

    A laboratory is set up in seven steps: needs and workflow analysis, site and infrastructure survey, layout design, technical designs, manufacturing and supply, services and installation, and finally testing, training and handover. The duration and cost depend on the size of the laboratory, the chemicals used, the ventilation required and the infrastructure of the existing building.